Language Selection
Search
Find a Dealer
Home: Products: Commercial: Water Cooled Chillers: 23XRV EVERGREEN®
 print friendly

23XRV EVERGREEN® Water Cooled Chiller

Models: 23XRV


Photo of a EVERGREEN® Water Cooled Chiller, Models: 23XRV      

The 23XRV chiller is the world’s first integrated
variable speed, water cooled, screw chiller. The 23XRV incorporates significant breakthroughs in
water-cooled chiller technology to provide excellent reliability and achieve superior efficiencies at true operating conditions without compromising the environment. Quality design and construction make
the Evergreen 23XRV chillers the best choice for modern, efficient chilled water plants.

Carrier's Evergreen chillers offer the best value in
high-efficiency chlorine-free centrifugal HVAC
chillers.

• High-Efficiency
• Variable Speed Screw Chiller
• 300 to 550 Nominal Tons (1055 to 1934 kW)

* This product may not be available for your
  geographical area. Please contact your local Dealer.
                Key Features                         Support Documents        

                                           Energy Star  Puron Refrigerant  Puron Refrigerant  

  • IPLV to 0.33
  • Chlorine-free HFC-134a refrigerant
  • Full Load kW/Ton to 0.53
  • Tri-rotor, positive displacement screw compressor
  • Hermetic compressor motor
  • Refrigerant-cooled, unit-mounted variable frequency drive
  • Low inrush current
  • Operation of up to 0.99 power factor
  • Flooded shell-and-tube cooler
  • Float valve
  • Superior oil management/cold condenser water operation
  • Internally and externally enhanced 0.025 in. (0.635 mm) copper tubing
  • 150 psig (1034 kPa) rated cooler and condenser
  • LCD control display
  • Microprocessor-based Product Integrated Control (PIC) III
  • Multilingual display
  • Demand limiting capability with Carrier Comfort Network® (CCN) communication link


    • Reliability Features

  • ASME constructed heat exchangers
  • Low voltage control circuits
  • Lowest industry refrigerant leakage rate at less than 0.1%
  • Hermetically sealed compressor motor
  • Automated controls may be tested before start-up
  • 65K AIC circuit breaker

    • Maintenance Features

  • Password protected extensive service menu with built-in diagnostic capabilities, troubleshooting, and corrective action recommendations for preset alarms
  • Alarm and alert files maintain the last 25 time and date stamped messages in memory
  • Configuration data backup with non-volatile memory
  • Refrigerant filter isolation valves
  • Thermistor type temperature sensor with quick connects in each water nozzle
  • Refrigerant isolation valves for in-chiller refrigerant storage (factory-installed option)
  • Unit-mounted pumpout unit for storing refrigerant inside the chiller during servicing (factory-installed option)
  • Hinged water boxes (factory-installed option)
  • Service contract available

    • Installation Features

  • Modular construction
  • Single point electrical connection
  • Can be dismantled and reassembled
  • Unit-mounted VFD with single point connection
  • Small footprint
  • Acoustical sound insulation kit (factory-installed option)
  • Full cold surface thermal insulation kit (factory-installed option)
  • Shipped fully charged (factory-installed option)

    • Factory-Installed Options

  • Enhanced tubing, .028 or .035 in. (0.711 or 0.889 mm):
      • Internally/externally enhanced copper tubing - cooler/condenser
      • Internally/externally enhanced cupronickel tubing - condenser
      • Smooth bore/externally enhanced copper tubing - cooler/condenser
      • Smooth bore/externally enhanced cupronickel tubing - condenser

  • Wall tubes, titanium, condenser, .025 or .028 in. (0.635 or 0.711 mm):
      • Internally enhanced tubes
      • Smooth bore tubes

  • Marine waterboxes (available for heat exchanger frames 3-5 only):
      • 150 psig (1034 kPa) waterbox
      • 300 psig (2068 kPa) waterbox

  • Nozzle-in-head waterbox, 300 psig (2068 kPa)
  • Hinged waterboxes
  • Flanged cooler and/or condenser waterbox nozzles
  • One, 2, or 3 pass cooler or condenser waterside construction
  • Zinc anodes
  • 100K AIC high interrupt circuit breaker with shunt trip
  • Analog voltmeter and ammeter with 3-phase selector switch
  • DataLINK™ or DataPort™ communication device
  • Refrigerant isolation valves
  • Shipped factory charged with refrigerant
  • Unit-mounted pumpout unit
  • Hot gas bypass
  • Acoustical sound insulation kit
  • Full cold surface thermal insulation (except waterbox covers)
  • Customer factory performance testing
  • Export crating

    • Field-Installed Accessories

  • BACnet™ Carrier translator
  • DataLINK™ or DataPort™ communication device
  • LonWorks® Carrier translator
  • Sensor package
  • Separate storage tank and pumpout unit
  • Stand-alone pumpout unit
  • Soleplate package
  • Spring isolator kit


back to top